Netgear routers are the best networking devices to enhance WiFi signals. However, some users are facing the routerlogin.net refused to connect issue while accessing the router login page. If you are also facing this issue then no need to worry. Every problem has a solution. Walk through this post and learn how to troubleshoot this issue in a hassle-free way.
But, before we discuss the troubleshooting tips, let’s have a look at the key reasons that might be creating the issue. Knowing the reason will make it easy for you to rectify it.
Reasons: Routerlogin.net Refused to Connect
There are plenty of causes why you are facing routerlogin.net refused-to-connect issues. A few of the most common factors are listed underneath:
- The internet connection is unstable or shaky.
- The VPN service is active on your client device.
- The web browser version is outdated.
- The distance between the wireless devices is not optimal.
Fixed: Routerlogin.net Refused to Connect
The technique to fix the routerlogin.net refused to connect issue is straightforward. Follow the guidelines mentioned in this post in the exact way to solve the problem.
- Power Cycle the Router
The first and foremost thing you need to do to fix this problem is restart the WiFi router. For this, disconnect the router from the existing modem. Thereafter, unplug it from the wall outlet. Hold on for a couple of seconds. Now, plug the router back into the power socket and turn on the switch. Apart from this do not forget to connect the wireless devices again.
- Turn off the Firewall/Antivirus
The next step in line to fix this issue is to disable the firewall and antivirus. The reason is that these applications do not support networking websites. To get rid of this issue, temporarily disable the firewall.
- Check Internet Connection
As we discussed earlier, the low-speed WiFi signal also creates ruterlogin.net refused-to-connect issue. To troubleshoot this problem, check the WiFi speed. If everything is right from your side then immediately contact your Internet Service Provider (ISP).
- Upgrade the Web Browser
Do you remember when you updated the browser? Well, it’s too long. Sometimes, this issue arises because you are using an outdated browser. To do away with this issue, update the browser to its latest version.
- Reset & Reconfigure
If you are still not able to resolve the routerlogin.net refused to connect issue, then worry not. We still have one more option that can help you get rid of the issue in a jiffy. And that is, resetting your Netgear WiFi router. Walk through the steps outlined below and know how to reset your wireless router:
- Firstly, remove the connection between the router and the existing modem.
- After that, be sure that your router is powered up properly.
- Now, look for the reset button on the router.
- As soon as you find it, use a paper clip or toothpick to push the button.
- Press and hold the button for a couple of seconds.
- Eventually, release the button.
In this manner, you can reset the router to its factory default settings. After that, you have to perform your Netgear WiFi router again via 192.168.1.1.
The Bottom Lines
That’s it! We conclude our guide on how to resolve the routerlogin.net refused-to-connect issue. We hope that with the help of the tips mentioned in this article, you will surely be able to log in to your router without any technical issues blocking your path. If you liked reading this article and want others to learn about what you did, do share it with your fellow readers via the comment section.
