Is the Netgear router not working message bugging you? Have you tried every method to resolve the issue? If you still are facing the same issue, get through this article. It covers some of the basic reasons why you might be facing the Netgear router not working issue.
Further, you are also going to learn about things to solve this issue. Plenty of things plays a major role in the functioning of a Netgear router. So, make sure you first understand what could be the problem. Later, you can work towards resolving it. Keep reading.
Netgear Router Not Working: Reasons
- Physical Interference
The placement of the router could be one of the reasons behind the router not working message. Hence, get rid of as much physical interference as you can.
- Incorrect Password
Using a wrong password while performing routerlogin.net setup could hamper its working. Make sure you do not do any mistakes while entering the password.
- Outdated Firmware
After some time, a firmware update comes out. If you are not updating it from time to time, it could result in various shortcomings.
- Hardware Issues
Faulty antennas or other minor hardware damage might lead to the Netgear router not working issue. So, run a check and look out for any damage.
- Invalid IP Address
Your default IP address should be in use to access the internet. In case it has been changed, you should restore it.
As you can see, all these errors could result in the Netgear router not working issue. So, you must first get rid of all these to improve the efficiency and working of the router.
Have a glance at some of the solutions for the Netgear router not working issue. Read on.
Netgear Router Not Working Solutions
Restart the Router
Connecting the router to the internet could result in various bugs or viruses entering it. In that case, restarting the router is one of the easiest solutions for the Netgear router not working problem. Just unplug the device and wait for a few seconds before replugging it.
Get in the Range
Routers have a limited range of WiFi connections. Therefore, if you move out of the allotted range of the internet connection, you are bound to face problems. Hence, either move the router or you should get closer to the router.
Update the Router Firmware
If you have been using the Netgear router for a while, you must update the firmware. You can do that by accessing the routerlogin website and entering your login credentials. Once you are logged in, you get access to the Netgear Genie setup wizard. That helps you upgrade the outdated firmware.
Fix Any Hardware Issue
In case the router has some hardware issues, you need to get them checked. For instance, remove the faulty hardware and install a new one. Get it repaired before connecting it to the internet. If everything fails, replace the old router with the new one.
Change IP Address
As mentioned above, every system has a designated IP address. Therefore, you must enter your router’s default IP address if there are issues with the working of your router. It is a unique ID that connects your computer or any device to the internet. Losing access to it will hamper your connection to the internet.
Reset the Router
Resetting a router means you are factory restoring it. It takes your router to the time when you first time unpacked it from the box. It could be the last resort for you if you are facing a Netgear router not working issue. Resetting will erase all the customized settings on your router. So, you should be aware of the consequences of resetting the router.
Wrap Up
Netgear router not working is quite a common issue. It could be solved by following the above-given steps. So, make sure you read all the above points to ensure if you face the issue again, you can resolve it immediately.
