Does your TP-Link wireless repeater keep disconnecting? Well, that is what almost every TP-Link repeater user is quibbling about these days. There can be various reasons behind this issue. Some of the topmost ones have been highlighted below:
- The connection between your TP-Link repeater and router is not stable.
- There is too much distance between your WiFi devices.
- Your repeater is running on an outdated firmware version.
- WiFi signals and technical glitches can also force you to come across the TP Link repeater keeps disconnecting issue.
Continue reading this post and learn about the different fixes through which you can troubleshoot the issue at hand.
Fixed: TP-Link Repeater Keeps Disconnecting Issue
Fix 1: Update Firmware
Start troubleshooting the issue by updating the firmware of your TP-Link wireless repeater via http tplinkrepeater net. To update your WiFi device, follow the instructions mentioned below:
- Switch on your computer.
- Launch an internet browser such as Google Chrome, Mozilla Firefox, Internet Explorer, Microsoft Edge, Apple Safari, Opera, etc.
- Download the latest firmware version for your TP-Link range extender.
- Extract the firmware file.
- Open a new tab on your chosen browser.
- In the address field of your browser, type http tplinkrepeater net.
- Press the Enter key.
- You will get welcomed by the official login page of your extender.
- Enter the default admin password and username credentials.
- Click the Log In button.
- You will get redirected to the Quick Setup wizard.
- Select Settings > System Tools > Firmware Upgrade.
- Click the Browse button.
- Once your WiFi-enabled device has located the firmware file, click Upload.
Note: You can also update the firmware of your repeater using the TP Link app.
Fix 2: Reboot Your Repeater
As mentioned above, technical glitches can also cause the issue you are currently using. To get rid of these glitches, you need to reboot your TP-Link repeater.
Here is how you give your device a fresh start:
- Power off your TP-Link repeater and unplug it from its wall socket.
- Wait for some time.
- Plug your TP-Link repeater back into its wall socket and turn it on.
Fix 3: Verify the Ethernet Connection
If you have used a damaged Ethernet cable to connect your TP-Link repeater and the existing router, then rectify your mistake right away by getting the cable replaced with a new one. If you want an alternate, then consider connecting your devices with the help of a wireless source.
Fix 4: Avoid WiFi Interference
Make sure that your TP-Link repeater is not placed near your cordless phones, mirrors, washing machines, fish tanks, baby monitors, Bluetooth speakers, refrigerators, microwave ovens, treadmills, televisions, aluminum studs, etc.
Apart from that, avoid keeping your repeater in corners or near concrete walls.
Fix 5: Bring Your Devices Closer
The distance between your TP-Link repeater and router also plays an important role when it comes down to its functioning. Thus, ensure that you have placed your repeater in the same room as that of the router.
Caution: Do not place your devices too close. Otherwise, their WiFi signals will clash and lead you to further technical problems.
Fix 6: Reset Your Repeater
Did none of the aforementioned troubleshooting hacks help you fix the TP-Link repeater keeps disconnecting issue? Well, in that case, consider performing factory default reset.
In order to reset your device, all you need to do is, press the Reset button, and wait for a few seconds. Once your device has been reset, reconfigure it.
Note: Whether you have performed TP Link AC750 setup or configured any other model in your home, the aforementioned hacks will remain same for all.
Our post to troubleshoot the TP-Link repeater keeps disconnecting issue has come to an end here. Hopefully, after walking through this post, you will be able to make the most out of your wireless device.